Vivo Y20 PD2034F Flash file can be used fix hang on logo ,Bootloop issue , Dead issue, Auto fastboot mode and recovery mode and other software issue. Always use latest version flash file to flash Vivo Y20 and read all flashing instructions before flashing the phone. Download full flash file, flash tool and drivers by link given below.
Download Vivo Y20 PD2034F Flash File Firmware:
- PD2034F_EX_A_1.71.8_vivo_qcom — Google Drive Link
- PD2034F_EX_A_1.71.4_vivo_qcom — Google Drive Link
- PD2034F_EX_A_1.70.19_vivo_qcom — Google Drive Link
- QPST Flash Tool
- Vivo Y20 Driver (Password : gsmmafia)
WhatsApp me for flashing +917017426154
Pre-requisites before flashing Vivo Y20 PD2034F
Battery should be charged up to 70%
Make sure you have Vivo USB OG Cable
Download and install QPST Tool in PC (Recommended: QCfire, Unlocktool, EMT Tool, MRT)
Download And install drivers in your pc
How to Flash Vivo Y20 PD2034F:
Recommended tool to use for flash this device : QCfire, Unlocktool, EMT tool, Miracle, MRT
- Download and install Qualcomm driver in your computer. if in case Qualcomm drivers are already installed on the computer, skip the step.
- Download and extract Flash file
- Download, Install and run QPST Flash Tool
- Connect Phone in EDL Mode by shorting EDL points
- Add Port in QPST Tool
- Click on Load XML and select rawprogram_unsparse.xml from stock rom folder
- Click on Load Patch and select patch0.xml from stock rom folder
- Click on Download Button and wait for flash finish
- All Done.
Note: If your device is not connecting to pc then download the driver from above and install in your pc.
WhatsApp me if you having any issue +917017426154
If you facing any problem in file or flashing your device, Contact us here
