Lava X10 S008M Flash File (Stock ROM)

Lava X10 S008M Flash File Firmware Official Rom used for fix brick condition, hang on logo and corrupted device and flashing of stock rom remove root sign from device. Download Lava X10 S008M Latest Flash File, Flash tool and driver from links given below. Read all flashing instructions before flashing the phone.

Download Lava X10 S008M Flash File Firmware:

• Lava_X10_S008M_20160705
• SP_Flash_Tool_v5.2124 (password : gsmmafia)
• MediaTek Driver

WhatsApp me for flashing (Paid) +917017426154

About Lava X10 

Lava X10 is Powered by Mediatek MT6735 (28 nm) Latest Chipset (CPU). It comes with 8GB of RAM. Lava X10 come with 2900mAh non-removable battery and fast charging 10W.Lava X10 runs Lava OS is based on Android 5.1 and packs 128GB of inbuilt storage and the phone have dedicated SD Card slot to Extend device storage.

Pre-requisites before flashing Lava X10 S008M

Battery should be charged up to 70%
Make sure you have Lava USB OG Cable
Download and install SP Flash Tool in PC (Recommended: UMT, Unlocktool, EMT Tool, MRT)
Download And install drivers in your pc
Obviously Knowledge of flashing

The Advantage Of Stock ROM:

• Flash Stock ROM to unbrick your Lava X10 S008M
• Flash Stock ROM to fix the boot loop problem
• Upgrade And Downgrade Lava X10 S008M
• Unroot and fix bugs on your phone
• To fix the lag or Stutter on your Lava X10 S008M
• By flashing Stock ROM, you can solve software problems
• Revert back to Stock to gain your warranty.

How To Flash Lava X10 S008M Using SP Flash Tool:

1. Download and install MediaTek driver in your pc (skip this step if MediaTek drivers are already installed)
2. Download Lava X10 S008M flash File and tool and extract both
3. Run SP flash tool and select Scatter File from flash file folder
4. Click Download Button
5. Power Off and connect your phone
6. All Done.

Whatsapp Me For Flashing +917017426154 (if you facing any problem while flashing)

Note: If your device is not connecting to pc then download the driver from above and install in your pc.

If you getting any error in flashing then Contact Me. I will help you.