Here you can download Infinix Note 10 Pro X695 Flash File on this page based on Android 11. the file for fix brick condition, hang on logo, corrupted device and all other software problems and flashing of stock rom remove root sign from device. Download Infinix Note 10 Pro Latest Flash File, Flash tool and driver from links given below. Read all flashing instructions before flashing the phone. Stock rom flashing can repair IMEI and fix all red, orange and yellow state problems.
Download Infinix Note 10 Pro X695 Flash File Firmware :
- X695-H854DEFGHI-R-GL-220417V1167 — Google Drive Link
- X695-H854DEFGHI-R-GL-220219V1133 — Google Drive Link
- MediaTek Driver
- SP Flash Tool
WhatsApp me for flashing (Paid) +917017426154
About Infinix Note 10 Pro
Infinix Note 10 Pro is Powered by MediaTek HELIO G95 (12nm). It comes with 6GB And 8GB of RAM. Infinix Note 10 Pro come with 5000mAh non-removable battery and fast charging of 33W. Infinix Note 10 Pro runs XOS 7.6 is based on Android 11 and packs 128GB, 256GB And 64GB of inbuilt storage and The device have dedicated SD card slot to extend device storage. Infinix Note 10 Pro comes with 6.95 inch 1080×2460 resolution big display which give you better entertainment experience.
Pre-requisites before flashing Infinix Note 10 Pro
Battery should be charged up to 70%
Make sure you have Infinix USB OG Cable
Download and install SP Flash Tool in PCÂ
Download And install drivers in your pc
Obviously knowledge of flashing.
The Advantage Of Stock ROM:
- Flash Stock ROM to unbrick your Infinix Note 10 Pro
- Flash Stock ROM to fix the boot loop problem
- Upgrade And Downgrade Infinix Note 10 Pro
- Unroot and fix bugs on your phone
- To fix the lag or Stutter on your Infinix Note 10 Pro
- By flashing Stock ROM, you can solve software problems
- Revert back to Stock to gain your warranty.
How To Flash Infinix Note 10 Pro X695 Using SP Flash Tool:
- Download and install MediaTek driver in your pc (skip this step if MediaTek drivers are already installed)
- Download Flash File And Flash Tool From Above
- Extract Flash Tool & Flash file
- Out of the icon appearing, Double click on Flash Tool.EXE
- Click on Scatter Loading and select MediaTek Scatter .Txt from flash file folder
- After selecting, Click on Download button
- Connect phone by pressing volume up and down button
- After detect phone as MediaTek USB Port, Flashing will be started automatically
- All done.
WhatsApp Me For Flashing +917017426154 (if you facing any problem while flashing)
Note: If your device is not connecting to pc then download the driver from above and install in your pc.
If you getting any error in flashing then Contact Me. I will help you.
