IQOO 9 SE PD2154F Flash file can be used for fix hang on logo, bricked device and other software problems and used for unlock device screen lock Pattern, FRP. Download Full flash file firmware for the device and use AF Tool For Latest. Always use latest version to flash and unlock the device.
Download IQOO 9 SE PD2154F Flash File Firmware:
- PD2154F_EX_A_3.7.12_vivo_qcom — Google Drive Link
- PD2154F_EX_A_3.6.7_vivo_qcom — Google Drive Link
- PD2154F_EX_A_3.6.3_vivo_qcom — Google Drive Link
- AF Flash Tool
- QPST Flash Tool
- IQOO 9 SE Driver (Password : gsmmafia)
WhatsApp me for flashing +917017426154
About IQOO 9 SE
IQOO 9 SE is Powered by Qualcomm Snapdragon 888 5G 5nm Latest Chipset. It comes with 8GB and 12GB of RAM. IQOO 9 SE come with 4500mAh non-removable battery and fast charging 66W. IQOO 9 SE runs Fun Touch OS Ocean is based on Android 12 and packs 128GB and 256GB of inbuilt storage and phone don’t have dedicated SD card slot to extend device storage.
Pre-requisites before flashing IQOO 9 SE PD2154F
Battery should be charged up to 70%
Make sure you have IQOO USB OG Cable
Download and install SP Flash Tool in PCÂ
Download And install drivers in your pc
Obviously Knowledge of flashing.
The Advantage Of Stock ROM:
- Flash Stock ROM to unbrick your IQOO 9 SE
- Flash Stock ROM to fix the boot loop problem
- Upgrade And Downgrade IQOO 9 SE
- Unroot and fix bugs on your phone
- To fix the lag or Stutter on your IQOO 9 SE
- By flashing Stock ROM, you can solve software problems
- Revert back to Stock to gain your warranty.
Note: Take a complete backup before doing flash and unlock, therefore we are not responsible for any data loss on the device.
How to Flash IQOO 9 SE PD2154F:
Recommended tool to use for flash this device :AF Tool
- Download and install Qualcomm driver in your computer. if in case Qualcomm drivers are already installed on the computer, skip the step.
- Download and extract Flash file
- Download, Install and run QPST Flash Tool
- Connect Phone in EDL Mode by shorting EDL points
- Add Port in QPST Tool
- Click on Load XML and select rawprogram_unsparse.xml from stock rom folder
- Click on Load Patch and select patch0.xml from stock rom folder
- Click on Download Button and wait for flash finish
- All Done.
Note: If your device is not connecting to pc then download the driver from above and install in your pc.
WhatsApp me if you having any issue +917017426154
If you facing any problem in file or flashing your device, Contact us here
